S-01
Structured cabling
Cat6 · Cat6A · Cat7
Permanent-link installation from comms room to outlet. Patch panels dressed, ports labelled to a consistent scheme, and every link certified.
Bondin Carter · Malta & Gozo
Structured cabling,installed and certified.
Cat6A and fibre networks for offices, hotels and industrial sites. Every link is tested to standard and handed over with the results — so the network you paid for is the network you got.
- Copper
- Cat6 · Cat6A · Cat7
- Fibre
- OS2 · OM4
- Coverage
- Malta & Gozo
A-01 · Services
The whole route, not just the cable.
S-02
Fibre optic installation
OS2 · OM4 · splicing
Backbone and riser fibre, fusion spliced and terminated into cassettes. OTDR and insertion-loss results supplied per core.
S-03
Containment & civils
Tray · trunking · ducting
Cable tray, basket, trunking and conduit installed to fill ratio and bend radius. Trenching and ducting where the route runs outside.
S-04
Network equipment supply
Switching · Wi-Fi · racks
Specification, supply and installation of switching, wireless and cabinets — configured, mounted and documented, not just delivered to a loading bay.
S-05
Testing & certification
Permanent link · channel
Certification testing across every installed link, with the full result set handed over as part of the as-built pack.
S-06
Moves, adds & changes
Occupied premises
Additional drops, re-patching and re-labelling in live buildings, scheduled around your operating hours.
A-02 · How a job runs
Level 00
Comms room
The cabinet is set, earthed and powered. Patch panels are mounted and numbered before a single cable is pulled.
Level 01
Riser
Backbone fibre and copper run vertically through the riser on dedicated containment, segregated from power.
Level 02
Floor distribution
Tray fans out above the ceiling to each zone. Bend radius and fill ratio are held the whole way — this is what fails a test later.
Level 03
Outlets
Faceplates terminated, labelled to match the panel, and tested. The label on the port matches the label on the panel matches the record.
Level 04
Certification
Every permanent link is tested and the results are handed over. If a link fails, it is re-terminated and re-tested before sign-off.
A-03 · Process
Four stages, and you get the paperwork at the end of all of them.
- P-01
Site survey
We walk the building, agree routes and identify what the drawings do not show.
- P-02
Specification
Cable class, containment, drop count and outlet positions, written down and priced.
- P-03
Installation
Containment first, then cable, then termination — scheduled around occupied hours.
- P-04
Handover
Test results, labelling schedule and as-built record, delivered as a pack.
A-04 · Recent work
Projects, photographed on site.
This section holds four to six real installations — the building, the drop count, the cable class, and the test results.
Project 01
awaiting photography & client permission
Project 02
awaiting photography & client permission
Project 03
awaiting photography & client permission
A-05 · Site survey
Start with a survey, not a quote.
We walk the building, agree the routes, and identify what the drawings do not show. You get a specification you can compare against anyone else’s — drop count, cable class, containment and timeline, written down.
- Telephone
- client input required
- client input required
- Coverage
- Malta & Gozo